Nutrient content
0.052 % Total Nitrogen (N) 0.022 % Magnesium (MgO)
0.033 % Total Potassium (K2O) 0.00375 % Iron (Fe)
0.54 % Alkaline components as CaO 0.00009 % Zinc (Zn)
0.018 % Sodium (Na) 0.000007 % Molybdenum (Mo)
0.032 % Sulphur (S)
Description
microfertile® plant for the biostimulation of useful and ornamental plants as well as the biome in the rhizosphere.
Contains active microbial organisms, naturally produced organic acids produced by them and algae. These have a
comprehensive effect on plants, stimulating their nutritional process and improving the efficiency of nutrient
utilization. microfertile® plant increases the availability of nutrients in the soil, has a positive effect on the qualitative
properties of the plants and increases their resistance to abiotic stress. The contained microorganisms and copper
proteins stimulate both the cold and frost tolerance of the plants by up to a further -7 C below their natural level and
an increased formation of oil and protein content.
Instructions for proper use
Reference is made to compliance with water and fertilizer regulations.
The manufacturer's recommendations for use must be observed; advice from the manufacturer is recommended.
Depending on the local situation, the basic recommendations may need to be adjusted.
microfertile® plant is applied to plants by spraying or watering.
For watering plants, we recommend at least five applications.
Add the product with water to approx. 5-10% (i.e. 5 to 10 litres of microfertile® plant in 100 litres of water).
As a general rule, to increase potency/fertility plan to apply microfertile® plant multiple times (ideally with each
watering) but not necessarily increase the concentration.
With constant watering, especially in greenhouses and hydroponic systems, the concentration can also be
significantly reduced (0.75–1%).
Ideal for grass, oilseeds, herbs, lettuce, tomatoes, hemp and any green leafy vegetable – in greenhouses and
hydroponic farms – the largest particles up to 10 microns are green microalgae cells.
Dangerous Elements
The content of dangerous elements and substances does not exceed the limit values applicable in Germany.
Advice on safety and health at work
This product is not a hazardous substance. However, keep the product out of the reach of children. Use protective
equipment when handling. In case of eye contact, rinse several times with plenty of water for a few minutes. If
possible, remove contact lenses and repeat rinsing. Consult a doctor. Wash hands thoroughly after skin contact. If
swallowed, rinse mouth thoroughly, drink clean water and seek medical attention. The product does not produce any
toxicological effect when inhaled.
Instructions for proper storage
Store microfertile® plant in the originally closed containers in a dark place and preferably at a temperature between
10 and 25°C. Protect from frost, fire and direct sunlight. Leaking into surface or ground water is to be avoided during
storage and application.
|
