Organic Plant Strengthener – BIO|ME|STIMULANT –
Using sand, animal by-products, food-producing plant substances, living micro-organisms

Nutrient contents
0,04% Total nitrogen (N)                      0,0142% Iron (Fe)
0,08% Total potassium oxide (K2O)       0,0007% Manganese (Mn)

Reactants
57% living microorganisms (heterotrophic microorganisms (Lactobacillaceae))
Sand of natural origin
Vegetable substances from food production (molasses)


Secondary ingredients
29.67% Organic Matter                                                     0.03% MgO
0.44% Alkaline components as CaO (neutralization value)     0.09% Sodium (Na)
0.03% Sulphur (S)                                                           0.91% Dry matter (DM)


Description
ekofertile® plant is an organic plant strengthener with iron (Fe) and manganese (Mn) for stimulating cultivated and
ornamental plants. The preparation in the form of an aqueous suspension of a liquid concentrate contains active
microbial organisms and organic acids naturally produced by them. These have a complex effect on plants by
stimulating their nutritional process and improving the efficiency of nutrient utilization. ekofertile® plant increases the
availability of nutrients in the soil, has a positive effect on the quality characteristics of plants and increases their
resistance to abiotic stress.

Instructions for safety and health at work
Reference is made to compliance with water and fertilizer regulations.
The manufacturer's recommendations for use must be observed, advice from the manufacturer is recommended.
Depending on the local situation, the basic recommendations may have to be adapted. Shake before use.
ekofertile® plant is applied by spraying or irrigation.
For watering during the growth phase of the plants, we recommend at least three applications at intervals of no
more than 14 days and then, if necessary, with each subsequent watering. To do this, dilute the product with water
to approx. 2.5% (i.e. 2.5 litres of ekofertile® plant in 100 litres of water). As a general rule to increase potency/
fertility, apply ekofertile® plant multiple times (ideally with each watering), but not increase the concentration.
When sowing and in the early leaf stage, use a maximum concentration of 1% (i.e. 1 litre in 100 litres of water).
Significantly higher concentrations can also be used to revitalize ailing shrubs and trees and to boost the fructose
content shortly before harvest.

 

Content of risk elements
The content of risk elements and substances does not exceed the limits valid in Germany.


Instructions for safety and health at work
The product is not characterized as a dangerous substance. Nevertheless, keep the product out of the reach of
children. Use protective equipment during handling. In case of contact with eyes, rinse repeatedly with plenty of
water for a few minutes. If possible, remove contact lenses and repeat rinsing. See a doctor. Wash hands thoroughly
after contact with skin. After ingestion thoroughly Rinse mouth, drink clean water and seek medical attention. The
product cannot cause inhalation toxicological effect.


Instructions for proper storage
Storage must be carried out in approved and sealed original packaging, in a dry place and at temperatures of 10-25°C
for a maximum of 3 months. Direct sunlight and frost should be avoided. During storage and application, it is
necessary to prevent discharge into surface or groundwater.

Package size: 1, 2, 3, 5, 10, 25, 120, 220, 600, 1.000 litres                        Weight: 1.000-1.010 Gramm/Litre

Production date: Production batch number:

Liability: Suppliers, producer and distributors are not liable for the individual use of ekofertile® plant.

ekofertile® plant is labeled in accordance with the German Fertilizer Ordinance
and is included in the FiBL list of inputs for organic farming in the Netherlands.

 

Producer: ekolive Germany GmbH, Humperdinckweg 12, D-33102 Paderborn | www.ekolive.eu | This email address is being protected from spambots. You need JavaScript enabled to view it.